Dell 5330dn - Workgroup Laser Printer B/W User Manual page 92

If you selected AppleTalk.
a. Press Scroll (
b. Press Scroll (
If you selected Wireless, assign a wireless network environment. For details, see
NOTE: When you set AppleTalk, you must restart your machine to apply new settings.
5. Press Select (
Configuring TCP/IP
Static Addressing: TCP/IP address is assigned manually by the system administrator.
Dynamic Addressing BOOTP/DHCP(default): TCP/IP address is assigned automatically by a DHCP or BOOTP server
on your network.
Setting TCP/IP
To enter the TCP/IP address from your printer's operator panel, take the following steps:
1. Press Menu (
2. Press Scroll (
3. Press Scroll (
If you selected TCP/IP(IPv4):
a. Press Scroll (
b. Press Scroll (
If you selected TCP/IP(IPv6):
a. Press Scroll (
b. Press Scroll (
d. Press Cancel (
Static Addressing
To enter the TCP/IP address from your printer's operator panel, take the following steps:
1. Press Menu (
2. Press Scroll (
3. Press Scroll (
4. Press Scroll (
5. Press Scroll (
to ) to highlight Activate and press Select (
to ) to change the setting to On (enable) or Off (disable).
) to save the selection.
).
to ) to highlight Network I/O Ports and press Select (
to ) to select the network protocol you want to use and press Select (
to ) to highlight IPv4 Activate and press Select (
to ) to change the setting to On (enable) or Off (disable).
to ) to highlight IPv6 Activate and press Select (
to ) to change the setting to On (enable) or Off (disable).
) to return to Standby mode.
).
to ) to highlight Network I/O Ports and press Select (
to ) to highlight TCP/IP(IPv4) and press Select (
to ) to highlight Set IP Address and press Select (
to ) to highlight Manual and press Select (
).
"Configuring
).
).
).
).
).
).
).
TCP/IP".
).