Minimum Requirements; Installing Dell Software For Local Printing - Dell 5330dn - Workgroup Laser Printer B/W User Manual

Windows 7

Minimum Requirements

Disk space: Windows 2000: 300 MB
Windows XP/Server 2003/Server 2008/Vista: 1 GB
Windows 7: 16 GB
Windows Server 2008 R2: 10GB
Memory: Windows 2000: 64 MB
Windows XP/Server 2003: 128 MB
Windows Vista/Server 2008: 512 MB
Windows 7: 1 GB
Windows Server 2008 R2: 512MB(2048MB)
CPU: Windows 2000: Pentium II 400 MHZ or higher
Windows XP/Server 2003/Server 2008/Vista: Pentium III 933 MHZ or higher
Windows 7: Pentium IV 1 GHz 32 bit or 64 bit processor or higher
Windows Server 2008 R2: Pentium IV 1 GHz (x86) or 1.4 GHz (x64) processors (2 GHz or faster)
Required software: Internet Explorer 5.0 or higher

Installing Dell Software for Local Printing

A local printer is a printer attached to your computer using a USB or Parallel cable. If your printer is attached to a network instead
of your computer, skip the following steps and go on to
Printer driver is the software that lets your computer communicate with your printer. The procedure to install drivers depends on
the operating system you are using.
NOTE: If you attach a USB or Parallel printer cable while your printer and computer are powered on, the Windows hardware
wizard launches immediately. Cancel the screen and use the Drivers and Utilities CD to install the Dell software.
1. Ensure that the printer is connected to your computer and powered on. All applications should be closed on your computer
before beginning installation.
2. Insert the Drivers and Utilities CD.
"Installing Dell Software for Network Printing".