Switch Members; Admin Domains And Switch Wwn - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual
Hp storageworks fabric os 6.1.1 administrator guide (5697-0235, december 2009)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Administrator's manual (576 pages) ,
- Hardware reference manual (256 pages) ,
- User manual (248 pages)
Table of Contents
Advertisement
NOTE:
If the switch domain ID changes, the domain,index members are invalid (they are not
automatically changed). You must then reconfigure the Admin Domain with the current domain,index
members.
Switch members
Switch members are defined by the switch WWN or Domain ID and have the following properties:
•
A switch member grants administrative control to the switch.
•
A switch member grants port control for all ports in that switch.
•
A switch member allows switch administrative operations such as disabling and enabling a switch,
rebooting, and firmware downloads.
•
A switch member does not provide zoning rights for the switch ports or devices.
To allow devices to be zoned within Admin Domains, you must specify the port members using
domain,portindex or device WWN members.
E_Ports (E_Ports, VE_Ports, EX_Ports, and VEX_Ports) are implicitly shared across all Admin Domains. An
administrator can perform port control operations only if the domain,portindex of the E_Port is part of the
Admin Domain.
NOTE:
Only the WWN of the switch is saved in the Admin Domain. If you change the Domain ID of the
switch, the Admin Domain ownership of the switch is not changed.
Admin Domains and switch WWN
Admin Domains are treated as fabrics. Because switches cannot belong to more than one fabric, switch
WWNs are converted so that they appear as unique entities in different Admin Domains (fabrics). This
WWN conversion is done only in the AD1 through AD254 context. AD0 and AD255 use
unconvertedswitch WWNs. The switch WWN has the following format:
10:00:nn:nn:nn:nn:nn:nn
In an Admin Domain context, the switch WWN is converted from NAA=1 to NAA=5 format, with the
Admin Domain number added, using the following syntax:
5n:nn:nn:nn:nn:nn:n9:xx
where xx is the AdminDomain_number.
For example, if the switch WWN is:
10:00:00:60:69:e4:24:e0
the converted WWN for that switch in AD1 would be:
50:06:06:9e:42:4e:09:01
Figure 8
shows an unfiltered view of a fabric with two switches, three devices, and two Admin Domains.
The devices are labeled with device WWNs and the switches are labeled with Domain ID and switch
WWNs.
Fabric OS 6.1.1 administrator guide 159
Advertisement
Table of Contents
