Setting Up Scp For Configuploads And Downloads; Listener Applications; Blocked Listener Applications - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

Setting up SCP for configuploads and downloads

1. Log in to the switch as admin.
2. Issue the configure command.
3. Enter y or yes at the cfgload attributes prompt.
4. Enter y or yes at the Enforce secure config Upload/Download prompt.
Example of setting up SCP for config upload/download:
switch:admin> configure
Not all options will be available on an enabled switch.
To disable the switch, use the "switchDisable" command.
Configure...
System services (yes, y, no, n): [no] n
ssl attributes (yes, y, no, n): [no] n
http attributes (yes, y, no, n): [no] n
snmp attributes (yes, y, no, n): [no] n
rpcd attributes (yes, y, no, n): [no] n
cfgload attributes (yes, y, no, n): [no] y
Enforce secure config Upload/Download (yes, y, no, n): [no] y
Enforce signature validation for firmware (yes, y, no, n): [no]

Listener applications

Brocade switches block Linux subsystem listener applications that are not used to implement supported
features and capabilities.
not start.
Table 20

Blocked listener applications

Listener
application
chargen
echo
daytime
discard
ftp
rexec
rsh
rlogin
time
rstats
rusers
104 Configuring standard security features
Table 20 lists the listener applications that Brocade switches either block or do
4/256 SAN Director and DC
Director
Disabled
Disabled
Disabled
Disabled
Disabled
Block with packet filter
Block with packet filter
Block with packet filter
Block with packet filter
Disabled
Disabled
HP StorageWorks 4/8 or 4/16, 8/8
SAN Switch, 8/24 SAN Switch,
8/40 SAN Switch, 8/80 SAN
Switch, Brocade 4Gb SAN Switch
for HP p-Class BladeSystem,
Brocade 4Gb SAN Switch for HP
c-Class BladeSystem, SAN Switch
4/32, 4/64 SAN Switch, SAN
Switch 4/32B, 400 Multi-protocol
(MP) Router
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled