HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 331

Hp storageworks fabric os 6.1.1 administrator guide (5697-0235, december 2009)
Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:
Table of Contents

Advertisement

5.
Issue the cfgAdd or cfgCreate and cfgEnable commands to add and enable the LSAN
configuration:
switch:admin> cfgadd "zone_cfg", "lsan_zone_fabric75"
switch:admin> cfgenable "zone_cfg"
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected.
Do you want to enable 'zone_cfg' configuration
zone config "zone_cfg" is in effect
Updating flash ...
6.
Log in as admin to fabric2.
7.
Issue the nsShow command to list Target A (50:05:07:61:00:5b:62:ed) and Target B
(50:05:07:61:00:49:20:b4).
switch:admin> nsshow
{
Type Pid
COS
NL
0508e8; 3;
FC4s: FCP [IBM
Fabric Port Name: 20:08:00:05:1e:34:11:e5
Permanent Port Name: 50:05:07:61:00:5b:62:ed
NL
0508ef; 3;
FC4s: FCP [IBM
Fabric Port Name: 20:08:00:05:1e:34:11:e5
Permanent Port Name: 50:05:07:61:00:49:20:b4
The Local Name Server has 2 entries }
8.
Issue the zoneCreate command to create the LSAN lsan_zone_fabric2, which includes the host
(10:00:00:00:c9:2b:6a:2c), Target A, and Target B:
switch:admin> zonecreate "lsan_zone_fabric2",
"10:00:00:00:c9:2b:c9:0c;50:05:07:61:00:5b:62:ed;50:05:07:61:00:49:20:b4"
9.
Issue the cfgShow command to verify that the zones are correct:
switch:admin> cfgshow
Defined configuration:
zone:
lsan_zone_fabric2
10:00:00:00:c9:2b:c9:0c; 50:05:07:61:00:5b:62:ed;
50:05:07:61:00:49:20:b4
Effective configuration:
no configuration in effect
10.
Issue the cfgAdd and cfgEnable commands to create and enable the LSAN configuration.
switch:admin> cfgadd "zone_cfg", "lsan_zone_fabric2"
switch:admin> cfgenable "zone_cfg"
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected.
Do you want to enable 'zone_cfg' configuration
zone config "zone_cfg" is in effect
Updating flash ...
1 1.
Log in as an admin and connect to the FC router.
12.
Issue the following commands to display information about the LSANs:
PortName
50:05:07:61:00:5b:62:ed;
DNEF-309170
F90F]
50:05:07:61:00:49:20:b4;
DNEF-309170
F90F]
(yes, y, no, n): [no] y
NodeName
50:05:07:61:00:1b:62:ed; na
50:05:07:61:00:09:20:b4; na
(yes, y, no, n): [no] y
Fabric OS 6.1.x administrator guide 331
TTL(sec)

Advertisement

Table of Contents
loading

Table of Contents