Examples Of Creating Dcc Policies - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

deviceportWWN
switch
3. To save or activate the new policy, issue either the secPolicySave or the secPolicyActivate
command.
If neither of these commands is entered, the changes are lost when the session is logged out. For more
information about these commands, see
changes to ACL

Examples of creating DCC policies

To create the DCC policy "DCC_POLICY_server" that includes device 1 1:22:33:44:55:66:77:aa and port
1 and port 3 of switch domain 1:
switch:admin> secpolicycreate "DCC_POLICY_server",
"11:22:33:44:55:66:77:aa;1(1,3)"
DCC_POLICY_server has been created
To create the DCC policy "DCC_POLICY_storage" that includes device port WWN
22:33:44:55:66:77:1 1:bb, all ports of switch domain 2, and all currently connected devices of switch
domain 2:
switch:admin> secpolicycreate "DCC_POLICY_storage",
"22:33:44:55:66:77:11:bb;2[*]"
DCC_POLICY_storage has been created
To create the DCC policy "DCC_POLICY_abc" that includes device 33:44:55:66:77:1 1:22:cc and ports 1
through 6 and port 9 of switch domain 3:
switch:admin> secpolicycreate "DCC_POLICY_abc",
"33:44:55:66:77:11:22:cc;3(1-6,9)"
DCC_POLICY_xxx has been created
To create the DCC policy "DCC_POLICY_example" that includes devices 44:55:66:77:22:33:44:dd and
33:44:55:66:77:1 1:22:cc, ports 1 through 4 of switch domain 4, and all devices currently connected to
ports 1 through 4 of switch domain 4:
switch:admin> secpolicycreate "DCC_POLICY_example",
"44:55:66:77:22:33:44:dd;33:44:55:66:77:11:22:cc;4[1-4]"
DCC_POLICY_xxx has been created
The WWN of the device port.
The switch WWN, Domain ID, or switch name. The port can
be specified by port or area number. Designating ports
automatically includes the devices currently attached to those
ports. The ports can be specified using any of the following
syntax methods:
(*) Selects all ports on the switch.
(1-6) Selects ports 1 through 6.
[*] Selects all ports and all devices attached to those ports.
[3, 9] Selects ports 3 and 9 and all devices attached to those
ports.
[1-3, 9] Selects ports 1, 2, 3, 9, and all devices attached to
those ports.
"*" This can be used to indicate DCC lockdown. This will
create a unique policy for each port in the fabric, locking it
down to the device connected or creating an empty policy to
disallow any device to be connected to it. This can be done
only when there are no other DCC policies defined on the
switch.
"ACL policy
policies" on page 1 16.
modifications" on page 1 16 and
Fabric OS 6.1.1 administrator guide 115
"Activating