HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 354

The Directors have a total of 10 slots. Slot numbers 5 and 6 are control processor blades; slots 1
through 4 and 7 through 10 are port blades. For 16-port blades, there are 16 ports, counted from
the bottom, numbered 0 to 15. For 32-port blades, there are 32 ports numbered 0 to 31.
• portnumber specifies a port number. Valid values for port number vary, depending on the switch
type. This operand is required.
• interval specifies an interval in seconds. The interval must be greater than or equal to five seconds.
For end-to-end monitoring, the Tx and Rx counts are measured in bytes. This operand is optional.
The following example displays an end-to-end monitor on a port at 6-second intervals:
switch:admin> perfMonitorShow --class EE 4/5 6
perfmonitorshow 53, 6: Tx/Rx are # of bytes and crc is # of crc errors
0
------------- ------------- ------------- ------------- -------------
crc Tx
============= ============= ============= ============= =============
0 0
0 53m
0 53m
0 53m
0 53m
0 53m
0 53m
0 53m
0 52m
0 52m
0 52m
0 52m
354 Administering advanced performance monitoring
1
Rx crc Tx Rx crc
0 0 0 0 0
4.9m 0 53m 4.9m 0
4.4m 0 53m 4.4m 0
4.8m 0 53m 4.8m 0
4.6m 0 53m 4.6m 0
5.0m 0 53m 5.0m 0
4.8m 0 53m 4.8m 0
4.5m 0 53m 4.5m 0
4.5m 0 52m 4.5m 0
5.0m 0 52m 5.0m 0
4.5m 0 52m 4.5m 0
4.6m 0 52m 4.6m 0
2 3
Tx Rx crc Tx
0 0 0 0
53m 4.9m 0 53m 4.9m
53m 4.4m 0 53m 4.4m
53m 4.8m 0 53m 4.8m
53m 4.6m 0 53m 4.6m
53m 5.0m 0 53m 5.0m
53m 4.8m 0 53m 4.8m
53m 4.5m 0 53m 4.5m
52m 4.5m 0 52m 4.5m
52m 5.0m 0 52m 5.0m
52m 4.5m 0 52m 4.5m
52m 4.6m 0 52m 4.6m
4
Rx crc Tx Rx
0 0 0 0
0 53m 0
0 53m 0
0 53m 0
0 53m 0
0 53m 0
0 53m 0
0 53m 0
0 52m 0
0 52m 0
0 52m 0
0 52m 0