Supported iSCSI initiators
Table 69
lists iSCSI intitiators supported by the iSCSI gateway service.
Table 69
Supported iSCSI initiators
iSCSI initiator driver versions
Windows
•
•
•
Linux
•
•
•
•
•
•
•
•
HP-UX
•
•
•
NIC/TOE cards
iSCSI HBAs
•
•
•
•
•
Checklist for configuring iSCSI
Configure the iSCSI gateway service after you install the FC4- 1 6IP blade in the 4/256 SAN Director.
Table 70
provides a high-level overview of the commands and links to the sections that detail the
procedures. See the Fabric OS Command Reference for detailed information on the commands.
Table 70
iSCSI target gateway configuration steps
Step
1
Activate iSCSI for the
FC4- 1 6IP.
2
Configure the IP address
for GbE port(s).
3
Optional) Configure the
IP route for the GbE
port(s).
4
(Easy) Automatically
maps FC targets to iSCSI
targets and names
target with unique IQN.
MS iSCSI initiator 2.02
MS iSCSI initiator 2.03
MS iSCSI initiator 2.04
RH EL 4 default initiator
RH 4 Advanced server, Update 4 (default initiator)
RH 5 Advanced server (default initiator)
2.6.10 - 4.0.2 iSCSI initiator (SourceForge,Net initiator)
2.4.20 - 3.6.2 iSCSI initiator (SourceForge,Net initiator)
SUSE 9
SUSE 9, SP3 (default initiator)
SUSE 10 (default initiator)
1 1i v1 - B1 1.1 1.03e
1 1i v1 - B.1 1.23.03e
1 1i v2 - B.1 1.23.03e
Alacritech SES2002XT
Alacritech 2000
QLogic 4050c
QLogic 4052
HP NC3xx
Command
fosConfig --enable iscsi
portCfg ipif <slot>/ge<port>
create <ipaddress> <netmask>
<mtu_size>
portCfg iproute
<slot>/ge<port> args
iscsiCfg --easycreate tgt
Procedure
"Enabling the iSCSI gateway
service" on page 262
"Configuring the GbE
interface" on page 263
"Configuring the GbE
interface" on page 263
"Automatic iSCSI VT
creation"
on page 265
Fabric OS 6.1.x administrator guide 259