1.
Error is returned indicating that the distribution setting must be accepted before you can set the
fabric-wide consistency policy.
Configuring the database distribution settings
The distribution settings control whether a switch accepts or rejects distributions of databases from other
switches and whether or not the switch may initiate a distribution. Configure the distribution setting to reject
when maintaining the database on a per-switch basis.
Table 34
lists the databases supported in Fabric OS 5.3.0 and later switches.
Table 34
Supported policy databases
Database type
Authentication policy database
DCC policy database
FCS policy database
IP Filter policy database
Password database
SCC policy database
130 Configuring advanced security features
Database identifier (ID)
AUTH
DCC
FCS
IPFILTER
PWD
SCC