Summary Of Certificate Commands; Configuring For Snmp; Commands For Displaying And Deleting Ssl Certificates - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

3. Issue the keytool command and respond to the prompts:
C:\Program Files\Java\j2re1.5.0_06\bin> keytool -import -alias
RootCert.crt -keystore ..\lib\security\RootCerts
Enter keystore password:
Owner: CN=Brocade, OU=Software, O=Brocade Communications, L=San Jose,
ST=California, C=US
Issuer: CN=Brocade, OU=Software, O=Brocade Communications, L=San Jose,
ST=California, C=US
Serial number: 0
Valid from: Thu Jan 15 16:27:03 PST 2007 until: Sat Feb 14 16:27:03 PST 2007
Certificate fingerprints:
Trust this certificate? [no]:
Certificate was added to keystore
In the example, changeit is the default password and RootCert is an example of a root certificate name.

Summary of certificate commands

Table 19 summarizes the commands for displaying and deleting certificates. For details on the commands,
see the Fabric OS Command Reference.
Table 19

Commands for displaying and deleting SSL certificates

Command
secCertUtil show
secCertUtil show
filename
secCertUtil showcsr
secCertUtil delete
filename
secCertUtil delcsr

Configuring for SNMP

You can configure for the automatic transmission of SNMP information to management stations. SNMPv3
and SNMPv1 are supported.
The configuration process involves configuring the SNMP agent and configuring SNMP traps. The
following commands are used in the process:
• Use the configure command to set the security level. You can specify no security, authentication only,
or authentication and privacy.
Use the snmpConfig command to configure the SNMP agent and traps for SNMPv3 or SNMPv1
•
configurations.
• If necessary for backward compatibility, you can use these legacy commands to configure for SNMP
v1:
• Use the agtCfgShow, agtCfgset, and agtCfgDefault commands to configure the SNMPv1
agent.
• Use the snmpMibCapSet command to filter at the trap level.
The SNMP trap configuration specifies the MIB trap elements to be used to send information to the SNMP
management station. There are two main MIB trap choices:
• Brocade-specific MIB trap
Associated with the Brocade-specific MIB (SW-MIB), this MIB monitors Brocade (HP) switches
specifically.
changeit
MD5: 71:E9:27:44:01:30:48:CC:09:4D:11:80:9D:DE:A5:E3
SHA1: 06:46:C5:A5:C8:6C:93:9C:FE:6A:C0:EC:66:E9:51:C2:DB:E6:4F:A1
Description
Displays the state of the SSL key and a list of installed certificates
Displays the contents of a specific certificate
Displays the contents of a CSR
Deletes a specified certificate
Deletes a CSR
yes
Fabric OS 6.1.1 administrator guide
RootCert -file
99