• For the local switch, issue the mstdDisable command.
• For the entire fabric, issue the mstdDisable all command.
A warning displays that all NID entries might be cleared.
3.
Enter y to disable the discovery feature.
NOTE:
Disabling discovery of Management Server topology might erase all NID entries.
switch:admin> mstddisable
This may erase all NID entries. Are you sure?
Request to disable MS Topology Discovery Service in progress....
*MS Topology Discovery disabled locally.
switch:admin> mstddisable all
This may erase all NID entries. Are you sure?
Request to disable MS Topology Discovery Service in progress....
*MS Topology Discovery disabled locally.
*MS Topology Discovery Disable Operation Complete!!
252 Configuring the Distributed Management Server
(yes, y, no, n): [no] y
(yes, y, no, n): [no] y