Table 193
IGMP Snooping Menu options
Command
trunk <1-40>
detail <IP address>
dump
clear
IGMP Mrouter options
Command: /maint/igmp/mrouter
[IGMP Multicast Routers Menu]
The following table describes the IGMP Multicast Routers Maintenance Menu options.
IGMP Multicast Group Menu options
Table 194
Command
vlan <1-4094>
dump
clear
Uuencode flash dump
Command: /maint/uudmp
Using this command, dump information is presented in uuencoded format. This format makes it easy to
capture the dump information as a file or a string of characters.
If you want to capture dump information to a file, set your communication software on your workstation to
capture session data prior to issuing the uudmp command. This will ensure that you do not lose any
information. Once entered, the uudmp command will cause approximately 23,300 lines of data to be
displayed on your screen and copied into the file.
Using the uudmp command, dump information can be read multiple times. The command does not cause
the information to be updated or cleared from flash memory.
Dump information is not cleared automatically. In order for any subsequent dump information to be
written to flash memory, you must manually clear the dump region. For more information on clearing the
dump region, see the "Clearing dump information" section later in this chapter.
Usage
Displays all IGMP multicast groups on a single trunk group.
Displays details about IGMP multicast groups, including source and timer
information.
Shows all IGMP Multicast groups.
Clears IGMP Multicast data from switch memory.
vlan
- Show all multicast router ports on a single vlan
dump
- Show all multicast router ports
clear
- Clear multicast router port table
Usage
Shows IGMP Multicast groups on a single VLAN.
Shows all IGMP Multicast routers.
Clears IGMP Multicast router data from switch memory.
Maintenance Menu
203