HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Command Reference Manual page 80

Hp 1:10gb ethernet bl-c switch for c-class bladesystem command reference guide
Hide thumbs Also See for 438031-B21 - 1:10Gb Ethernet BL-c Switch:
Table of Contents

Advertisement

The following table describes the Remote Monitoring (RMON) statistics of the selected port:
RMON statistics
Table 52
Statistics
etherStatsDropEvents
etherStatsOctets
etherStatsPkts
etherStatsBroadcastPkts
etherStatsMulticastPkts
etherStatsCRCAlignErrors
etherStatsUndersizePkts
etherStatsOversizePkts
etherStatsFragments
etherStatsJabbers
etherStatsCollisions
etherStatsPkts64Octets
etherStatsPkts65to127Octets
Description
The total number of packets received that were dropped because of
system resource constraints.
The total number of octets of data (including those in bad packets)
received on the network (excluding framing bits but including
FCS octets).
The total number of packets (including bad packets, broadcast packets,
and multicast packets) received.
The total number of good packets received that were directed to the
broadcast address.
The total number of good packets received that were directed to a
multicast address.
The total number of packets received that had a length (excluding
framing bits, but including FCS octets) of between 64 and 1518 octets,
inclusive, but had either a bad Frame Check Sequence (FCS) with an
integral number of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
The total number of packets received that were less than 64 octets long
(excluding framing bits but including FCS octets) and were otherwise
well formed.
The total number of packets received that were longer than 1518 octets
(excluding framing bits but including FCS octets) and were otherwise
well formed.
The total number of packets received that were less than 64 octets in
length (excluding framing bits but including FCS octets) and had either a
bad Frame Check Sequence (FCS) with an integral number of octets
(FCS Error) or a bad FCS with a non-integral number of octets
(Alignment Error).
The total number of packets received that were longer than 1518 octets
(excluding framing bits, but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS
Error) or a bad FCS with a non-integral number of octets (Alignment
Error). Jabber is defined as the condition where any packet exceeds 20
ms. The allowed range to detect jabber is between 20 ms and 150 ms.
The best estimate of the total number of collisions on this Ethernet
segment.
The total number of packets (including bad packets) received that were
less than or equal to 64 octets in length (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received that were
greater than 64 octets in length (excluding framing bits but including
FCS octets).
Statistics Menu
80

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1:10gbe

Table of Contents