System Maintenance Options; Forwarding Database Options - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Command Reference Manual

Table 186 Maintenance Menu options
Command
igmp
uudmp
ptdmp
ptfile
cldmp
panic
tsdmp
pttsdmp

System maintenance options

Command: /maint/sys
[System Maintenance Menu]
The System Maintenance Menu is reserved for use by HP technical support. The options are used to
perform system debugging.
The following table describes the System Maintenance Menu options.
System Maintenance Menu options
Table 187
Command
flags <new NVRAM flags word as
0xXXXXXXXX>

Forwarding Database options

Command: /maint/fdb
[FDB Manipulation Menu]
The Forwarding Database (FDB) Manipulation Menu can be used to view information and to delete a
MAC address from the Forwarding Database or clear the entire Forwarding Database. This is helpful in
identifying problems associated with MAC address learning and packet forwarding decisions.
Usage
Displays the IGMP Maintenance Menu.
Displays dump information in uuencoded format.
Saves the system dump information via FTP/TFTP.
Saves a specified file from the switch root file system to an FTP/TFTP server.
Clears dump information from flash memory.
Dumps MP information to flash and reboots.
Dumps all switch information, statistics, and configuration.
Redirects the technical support dump (tsdmp) to an external FTP/TFTP server.
flags - Set NVRAM flag word
find - Show a single FDB entry by MAC address
port - Show FDB entries for a single port
vlan - Show FDB entries for a single VLAN
dump - Show all FDB entries
clear - Clear entire FDB, then re-add static entries
Usage
Sets the flags that are used for debugging purposes by HP
technical support.
Maintenance Menu
199