802.1x configuration
Command: /cfg/l2/8021x
[802.1x Configuration Menu]
This feature allows you to configure the HP 1:10GbE switch as an IEEE 802.1x Authenticator, to provide
port-based network access control. The following table describes the 802.1x Configuration Menu options.
802.1x Configuration Menu options
Table 103
Command
global
port <port number>
ena
dis
cur
802.1x Global configuration
Command: /cfg/l2/8021x/global
[802.1x Global Configuration Menu]
The global 802.1x menu allows you to configure parameters that affect all ports in the switch (except
management port 18).
global
- Global 802.1x configuration menu
port
- Port 802.1x configuration menu
ena
- Enable 802.1x access control
dis
- Disable 802.1x access control
cur
- Show 802.1x configuration
mode
- Set access control mode
qtperiod - Set EAP-Request/Identity quiet time interval
txperiod - Set EAP-Request/Identity retransmission timeout
suptmout - Set EAP-Request retransmission timeout
svrtmout - Set server authentication request timeout
maxreq
- Set max number of EAP-Request retransmissions
raperiod - Set reauthentication time interval
reauth
- Set reauthentication status to on or off
default
- Restore default 802.1x configuration
cur
- Display current 802.1x configuration
Description
Displays the global 802.1x Configuration Menu.
Displays the 802.1x Port Menu.
Globally enables 802.1x.
Globally disables 802.1x.
Displays current 802.1x parameters.
Configuration Menu
130