Table 26
Layer 3 Information Menu options
Command
igmp
vrrp
dump
Route information
Command: /info/l3/route
[IP Routing Menu]
Using the commands listed below, you can display all or a portion of the IP routes currently held in the
switch.
Table 27
Route Information menu options
Command
find <IP address>
gw <IP address>
type indirect|direct|local|
broadcast|martian|multicast
tag fixed|static|addr|rip|ospf|
broadcast|martian|multicast
if <IP address>
dump
Usage
Displays IGMP Information Menu.
Displays the VRRP Information Menu.
Dumps all switch information available from the Layer 3 Menu (10K or more, depending on
your configuration).
If you want to capture dump data to a file, set your communication software on your
workstation to capture session data prior to issuing the dump commands.
find
- Show a single route by destination IP address
gw
- Show routes to a single gateway
type
- Show routes of a single type
tag
- Show routes of a single tag
if
- Show routes on a single interface
dump
- Show all routes
Usage
Displays a single route by IP address. For example, 100.10.1.1.
Displays routes to a single gateway. For example, 100.10.1.2.
Displays routes of a single type.
Displays routes of a single tag.
Displays routes on a single interface.
Displays all routes configured in the switch.
Information Menu
50