Qos 802.1P Configuration; Access Control Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Command Reference Manual

The following table describes the QoS Configuration Menu options.
QoS Configuration Menu options
Table 158
Command
8021p

QoS 802.1p configuration

Command: /cfg/qos/8021p
[802.1p Menu]
This feature provides the HP 1:10GbE switch the capability to filter IP packets based on the IEEE 802.1p
bits in the packet's VLAN header. The 802.1p bits specify the priority that you should give to the packets
while forwarding them. The packets with a higher (non-zero) priority bits are given forwarding preference
over packets with numerically lower priority bits value.
The following table describes the 802.1p Configuration Menu options.
Table 159 802.1p Configuration Menu options
Command
priq <0-7> <0-1>
qweight <0-1> <0-15>
numcos 2|8
default
cur

Access Control configuration

Command: /cfg/acl
[ACL Menu]
Use this menu to create Access Control Lists (ACLs) and ACL Groups. ACLs define matching criteria used
for IP filtering and Quality of Service functions.
Description
Displays 802.1p configuration menu.
priq - Set priority to COS queue mapping
qweight - Set weight to a COS queue
numcos - Set number of COS queue
default - Reset 802.1p configuration to default values.
cur - Display current 802.1p configuration
Description
Maps the 802.1p priority of to the Class of Service queue (COSq) priority. Enter
the 802.1p priority value (0-7); followed by the Class of Service queue (0-1) that
handles the matching traffic.
Configures the weight of the selected Class of Service queue (COSq). Enter the
queue number (0-1), followed by the scheduling weight (0-15).
Sets the number of Class of Service queues for switch ports.
The default value is 2.
Resets 802.1p configuration to default values.
Displays the current 802.1p parameters.
acl - Access Control List Item Config Menu
group - Access Control List Group Config Menu
cur - Display current ACL configuration
Configuration Menu
174