Ip Binding Table - NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual

IP Binding Table

Use the IP Binding Table page to view or delete the IP ACL bindings.
To display the IP Binding Table, click Security  ACL, then click the Advanced  Binding
Table link
The following table describes the information displayed in the MAC Binding Table.
Field
Interface
Direction
ACL Type
ACL ID
Seq No.
To delete an IP ACL-to-interface binding, select the check box next to the interface and click
Delete.
194 | Chapter 5: Managing Device Security
GS108T and GS110TP Smart Switch Software Administration Manual
Description
Displays the interface to which the IP ACL is bound.
Specifies the packet filtering direction for ACL. The only valid direction is
Inbound, which means the IP ACL rules are applied to traffic entering the
port.
Displays the type of ACL assigned to selected interface and direction.
Displays the ACL Number identifying the ACL assigned to selected interface
and direction.
Displays the Sequence Number signifying the order of specified ACL relative
to other ACLs assigned to selected interface and direction.