NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual page 190

To configure rules for an IP ACL:
To add an IP ACL rule, select the ACL ID to add the rule to, select the check box in the
1.
Extended ACL Rule table, and click Add. The page displays the extended ACL Rule
Configuration fields, as the following figure shows.
Configure the new rule.
2.
Rule ID. Specify a number from 1–10 to identify the IP ACL rule. You can create up to
•
10 rules for each ACL.
190 | Chapter 5: Managing Device Security
GS108T and GS110TP Smart Switch Software Administration Manual