NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual page 205

Smart switch
Hide thumbs Also See for GS110TP - ProSafe Gigabit Smart Switch:
Table of Contents

Advertisement

GS108T and GS110TP Smart Switch Software Administration Manual
Field
Packets Transmitted
1519-1522 Octets
Total Packets Transmitted
Successfully
Unicast Packets
Transmitted
Multicast Packets
Transmitted
Broadcast Packets
Transmitted
Total Transmit Errors
Tx FCS Errors
Tx Oversized
Underrun Errors
Total Transmit Packets
Discarded
Single Collision Frames
Multiple Collision Frames
Excessive Collision Frames A count of frames for which transmission on a particular interface fails due to
Port Membership Discards
STP BPDUs Received
STP BPDUs Transmitted
RSTP BPDUs Received
RSTP BPDUs Transmitted
MSTP BPDUs Received
MSTP BPDUs Transmitted
Description
The total number of packets (including bad packets) transmitted that were
between 1519 and 1522 octets in length inclusive (excluding framing bits but
including FCS octets).
The number of frames that have been transmitted by this port to its segment.
The total number of packets that higher-level protocols requested be
transmitted to a subnetwork-unicast address, including those that were
discarded or not sent.
The total number of packets that higher-level protocols requested be
transmitted to a Multicast address, including those that were discarded or not
sent.
The total number of packets that higher-level protocols requested be
transmitted to the Broadcast address, including those that were discarded or
not sent.
The sum of Single, Multiple, and Excessive Collisions.
The total number of packets transmitted that had a length (excluding framing
bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but
had a bad Frame Check Sequence (FCS) with an integral number of octets
The total number of frames that exceeded the max permitted frame size. This
counter has a max increment rate of 815 counts per second at 10 Mb/s.
The total number of frames discarded because the transmit FIFO buffer
became empty during frame transmission.
The sum of single collision frames discarded, multiple collision frames
discarded, and excessive frames discarded.
A count of the number of successfully transmitted frames on a particular
interface for which transmission is inhibited by exactly one collision.
A count of the number of successfully transmitted frames on a particular
interface for which transmission is inhibited by more than one collision.
excessive collisions.
The number of frames discarded on egress for this port due to egress filtering
being enabled.
Number of STP BPDUs received at the selected port.
Number of STP BPDUs transmitted from the selected port.
Number of RSTP BPDUs received at the selected port.
Number of RSTP BPDUs transmitted from the selected port.
Number of MSTP BPDUs received at the selected port.
Number of MSTP BPDUs transmitted from the selected port.
Chapter 6: Monitoring the System
| 205

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents