Getting Started
1.
®
The NETGEAR
GS108T and GS110TP Smart Switch Software Administration Manual
describes how to configure and operate the GS108T and GS110TP Gigabit Smart Switches by
using the Web-based graphical user interface (GUI). This manual describes the software
configuration procedures and explains the options available within those procedures.
Document Organization
The GS108T and GS110TP Smart Switch Software Administration Manual contains the
following chapters:
Chapter 1, Getting
•
configuration and accessing the user interface.
Chapter 2, Configuring System
•
features such as SNMP, DHCP, and port information.
Chapter 3, Configuring Switching
•
layer 2 switching features.
Chapter 4, Configuring Quality of
•
Lists (ACLs), and how to configure Differentiated Services and Class of Service features.
Chapter 5, Managing Device
•
security information such as port access control and RADIUS server settings.
Chapter 6, Monitoring the
•
the switch and its ports, and to configure how the switch monitors events.
Chapter 7, Maintaining the
•
Chapter 8, Accessing
•
Appendix A, Hardware Specifications and Default
•
specifications and default values on the GS108T and GS110TP Smart Switches.
Appendix B, Configuration
•
features on the GS108T and GS110TP Smart Switches, such as VLANs and ACLs.
Refer to the release notes for the GS108T and GS110TP Gigabit
Note:
Smart Switches for information about issues and workarounds.
Started, contains information about performing the initial system
Information, describes how to configure administrative
Information, describes how to manage and monitor the
Service, describes how to manage the Access Control
Security, contains information about configuring switch
System, describes how to view a variety of information about
System, describes features to help you manage the switch.
Help, describes how to access Online Help resources for the switch.
Examples, contains examples of how to configure various
Values, contains hardware
Chapter 1: Getting Started
1
| 8