Web Access - NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual

GS108T and GS110TP Smart Switch Software Administration Manual

Web Access

To access the GS108T or GS110TP management interface, use one of the following
methods:
From the Smart Control Center, select the switch and click Web Browser Access.
•
Open a Web browser and enter the IP address of the switch in the address field.
•
You must be able to ping the IP address of the GS108T or GS110TP management interface
from your administrative system for Web access to be available. If you used the Smart
Control Center to set up the IP address and subnet mask, either with or without a DHCP
server, use that IP address in the address field of your Web browser. If you did not change
the IP address of the switch from the default value, enter 192.168.0.239 into the address
field.
Clicking Web Browser Access on the Smart Control Center or accessing the switch directly
from your Web browser displays the login screen shown in the following figure.
Figure 2. Login Screen
Chapter 1: Getting Started | 17