NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual page 217

GS108T and GS110TP Smart Switch Software Administration Manual
From the Session Mode menu, select the mode for port mirroring on the selected port:
3.
Enable. Multiple Port Mirroring is active on the selected port.
•
Disable. Port mirroring is not active on the selected port, but the mirroring information
•
is retained.
Click Apply to apply the settings to the system. If the port is configured as a source port, the
4.
Mirroring Port field value is Mirrored.
To delete a mirrored port, select the check box next to the mirrored port, and then click
5.
Delete.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
6.
the latest value of the switch.
Chapter 6: Monitoring the System | 217