NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual page 260

Since the edge ports are not at risk for network loops, ports with Fast Link enabled
transition directly to the Forwarding state.
Click Apply.
8.
You can use the CST Port Status screen to view spanning tree information about each
port.
From the MST Configuration screen, create a MST instances with the following settings:
9.
MST ID: 1
•
Priority: Use the default (32768)
•
VLAN ID: 300
•
For more information, see
Click Add.
10.
Create a second MST instance with the following settings
11.
MST ID: 2
•
Priority: 49152
•
VLAN ID: 500
•
Click Add.
12.
In this example, assume that Switch 1 has become the Root bridge for the MST instance 1,
and Switch 2 has become the Root bridge for MST instance 2. Switch 3 has hosts in the
Sales department (ports g1, g2, and g3) and in the HR department (ports g4 and g5).
Switches 1 and 2 also have hosts in the Sales and Human Resources departments. The
hosts connected from Switch 2 use VLAN 500, MST instance 2 to communicate with the
hosts on Switch 3 directly. Likewise, hosts of Switch 1 use VLAN 300, MST instance 1 to
communicate with the hosts on Switch 3 directly.
The hosts use different instances of MSTP to effectively use the links across the switch. The
same concept can be extended to other switches and more instances of MSTP.
260 | Appendix B: Configuration Examples
GS108T and GS110TP Smart Switch Software Administration Manual
on page 102.
MST Configuration