Port Settings - Dell PowerConnect 5524P User Manual

Port Settings

After a VLAN has been defined, assign ports to it.
To assign a VLAN to untagged packets, arriving on the device, enter the port
default VLAN ID (PVID). All untagged packets arriving to the device are
tagged by the ports PVID.
All ports must have a defined PVID. If no other value is configured, the
default VLAN PVID is used. VLAN ID #1 is the default VLAN, and cannot
be deleted from the system.
To configure ports on a VLAN:
1 Click Switching > VLAN > Port Settings in the tree view to display the
Port Settings: Summary page.
Figure 14-3. Port Settings: Summary
All interfaces on the selected unit and their settings are displayed.
2 To modify the port settings, click Edit, and enter the fields:
– Interface — Enter the unit/port number to be modified.
– Switchport Mode — Select whether the port is in Layer 2 or Layer 3.
If the port is in Layer 2, enter the parameters described below,
otherwise the fields are not relevant.
468
Dell PowerConnect 55xx Systems User Guide