Dell PowerConnect 5524P User Manual page 143

Monitoring Users Using the CLI Commands
The following table summarizes the CLI commands for monitoring users:
Table 8-15. Monitoring Users CLI Commands
CLI Command
show dot1x monitoring result
[username username]
The following is an example of the CLI commands:
console# show dot1x monitoring Tom
Username: Tom
Port g1
Quiet period: 60 Seconds
Tx period: 30 Seconds
Max req: 2
Supplicant timeout: 30 Seconds
Server timeout: 30 Seconds
Session Time (HH:MM:SS): 08:19:17
MAC Address: 00:08:78:32:98:78
Authentication Method: Remote
Assigned VLAN: 207
Reason for Failure:VLAN was not defined on Switch
Description
Displays the captured information of each
interface/host on the switch/stack.
Dell PowerConnect 55xx Systems User Guide
143