Dell PowerConnect 5524P User Manual page 458

Defining MSTP Interfaces Using CLI Commands
The following table summarizes the CLI commands for defining MSTP
interfaces as displayed in the MSTP Interfaces pages.
Table 13-7. MSTP Interface CLI Commands
CLI Command
spanning-tree mst
instance-id cost cost
no spanning-tree mst
instance-id cost
spanning-tree mst
instance-id port-
priority priority
show spanning-tree mst-
configuration
The following is an example of the CLI commands:
console(config)# interface gi1/0/9
console(config-if)# spanning-tree mst 1 cost 4
458
Dell PowerConnect 55xx Systems User Guide
Description
Sets the path cost of the port for MST
calculations (in Interface Configuration
mode).
Use the no form of this command to restore
the default configuration.
Configures the device priority for the specified
spanning-tree instance (in Interface
Configuration mode).
Use the no form of this command to restore
the default configuration.
Displays the MST configuration.