The following is an example of the CLI commands:
console(config)# sntp server 100.1.1.1 poll key 10
console# show sntp status
Clock is unsynchronized
Unicast servers:
Server
--------------- --------- -------------
Anycast server:
Server Interface
---------------
Broadcast:
Interface
------------ --------------- -----------------------
gi1/0/1
SNTP Interfaces
If receiving time information from Anycast servers is enabled, you can
determine through which interface the Anycast packets are sent and received.
If no interface is defined, Anycast requests are not sent.
Status
Last Response
Status
Last Response
-------- --------------
IP Address
Dell PowerConnect 55xx Systems User Guide
--------
Last Response
00:00:00.0
Jan 1 2010
Offset
Delay
[mSec]
[mSec]
-------
Offset
Delay
[mSec]
[mSec]
------
------
183