Etherlike Statistics
To display interface error statistics:
1 Click Statistics/RMON > Table Views > Etherlike Statistics in the tree
view to display the Etherlike Statistics page.
Figure 21-5. Etherlike Statistics
2 Select a port/LAG.
The following fields are displayed:
Frame Check Sequence (FCS) Errors — Number of frames received
–
that are an integral number of octets in length but do not pass the
FCS check.
–
Single Collision Frames — Number of frames that are involved in a
single collision, and are subsequently transmitted successfully.
–
Late Collisions — Number of collisions detected after the first 512
bits of data.
606
Dell PowerConnect 55xx Systems User Guide