Dell PowerConnect 5524P User Manual page 687

Previously-defined policy bindings are displayed.
2 To bind a policy to an interface, click Add.
3 Select the interface assigned to the policy.
4 Select the Policy Name to be activated on the interface.
Defining Policy Binding Using CLI Commands
The following table summarizes the CLI commands for setting the fields in
the Policy Binding pages.
Table 22-18. Policy Binding CLI Commands
CLI Command
service-policy input
policy-map-name
no service-policy
input
The following is an example of the CLI commands:
console(config-if)# service-policy input policy1
Description
Applies a policy map to the input of a particular
interface.
Use the no form of this command to detach a
policy map from an interface.
Dell PowerConnect 55xx Systems User Guide
687