Dell PowerConnect 5524P User Manual page 434

Table 13-1. STP Global Parameter CLI Commands (Continued)
CLI Command
spanning-tree pathcost method
{long|short}
no spanning-tree pathcost
method
spanning-tree priority
priority
spanning-tree priority
no
spanning-tree hello-time
seconds
no spanning-tree hello-time
spanning-tree max-age seconds
no spanning-tree max-age
seconds
spanning-tree forward-time
seconds
no spanning-tree forward-time
show spanning-tree
[[gigabitethernet|tengigabite
thernet] port-number|port-
channel LAG-number] [instance
instance-id]
show spanning-tree [detail]
[active|blockedports]
[instance instance-id]
show spanning-tree mst-
configuration
434
Dell PowerConnect 55xx Systems User Guide
Description
Sets the default path cost method.
Use the no form of this command to return
to the default configuration.
Configures the spanning tree priority.
Use the no form of this command to
restore the default device spanning-tree
priority.
Configures the spanning tree bridge Hello
Time, which is how often the device
Broadcasts Hello messages to other
devices.
Use the no form of this command to
restore the default configuration.
Configures the spanning tree bridge
maximum age.
Use the no form of this command to
restore the default configuration
Configures the spanning tree bridge
forward time, which is the amount of time
a port remains in the listening and learning
states before entering the forwarding state.
Use the no form of this command to
restore the default configuration.
Displays spanning tree configuration.
Displays detailed spanning tree
information on active or blocked ports.
Displays spanning tree MST configuration
identifier.