Port Settings - Dell X1000 Series User Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
The aging time starts after the MAC address is aged out of the
Dynamic MAC Address table. The default time is 300 sec. For more
information on defining MAC address age out time, see "Dynamic
Address Table " on page 174.

Port Settings

To configure voice VLAN properties on a port or LAG:
1 Click Network Administration > VLAN > Voice VLAN > Port Setting.
A list of the ports and their voice VLAN settings is displayed. To view
LAGs, select LAGs in the View By drop-down list. The following field is
displayed (all other fields are described below in the Edit page):
– Membership — Displays whether the port is a member of the voice
VLAN.
2 Select an interface, click its Edit icon and enter the fields:
Interface — Displays the specific port or LAG to which the Voice
–
VLAN settings are applied.
– Voice VLAN Mode — Select the Voice VLAN mode. The possible
options are:
• None — Disables the selected port/LAG on the Voice VLAN. This
is the default.
• Static — Statically adds the port to the Voice VLAN. This is
usually done for VoIP uplink ports that connect the device to VoIP
PBX, for example.
• Auto — Indicates that if traffic with an IP phone MAC address is
transmitted on the port/LAG, the port/LAG automatically joins
the Voice VLAN. The port/LAG is aged out of the voice VLAN if
the IP phone's MAC address (with an OUI prefix) is aged out. If
the MAC address of the IP phones OUI was added manually to a
port/LAG in the voice VLAN, the user cannot add it to the Voice
VLAN in Auto mode, only in Static mode.
– Voice VLAN Security — Enable/disable security on the interface. If
this is enabled, it ensures that packets arriving with an unrecognized
OUI are dropped (for example data packets).
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
158
Network Administration: VLAN
Guide\Dell_Astute_Network_Admin_VLAN.fm