Device Popup Menus - Cisco 2950G 24 - Catalyst Switch Software Configuration Manual

Chapter 3 Getting Started with CMS
Figure 3-12 Multilink Decomposer Window

Device Popup Menus

Specific devices in the Topology view display a specific popup menu:
•
•
•
•
•
•
The Device Manager option in these popup menus is available in read-only mode on Catalyst 2900 XL
Note
and Catalyst 3500 XL switches running Release 12.0(5)WC2 and later. It is also available on
Catalyst 2950 switches running Release 12.1(6)EA2 and later and on Catalyst 3550 switch running
Release 12.1(8)EA1 or later. It is not available on the Catalyst 1900 and Catalyst 2820 switches.
To display a device popup menu, click an icon, and right-click.
Table 3-16 Device Popup Menu of a Cluster Icon
Popup Menu Option
Expand cluster
Properties
78-14982-01
Cluster (see Table 3-16)
Command switch (see Table
Member or standby command switch (see
Candidate switch with an IP address (see
Candidate switch without an IP address (see
Neighboring devices (see
Task
View a cluster-specific topology view.
Display information about the device.
3-17)
Table 3-18)
Table 3-19)
Table 3-20)
Table 3-21)
Catalyst 2950 Desktop Switch Software Configuration Guide
Menus and Toolbar
3-23