Accelerated Aging To Retain Connectivity; Configuring Spanning-Tree Features - Cisco 2950G 24 - Catalyst Switch Software Configuration Manual

Desktop switch
Hide thumbs Also See for 2950G 24 - Catalyst Switch:
Table of Contents

Advertisement

Chapter 11
Configuring STP
Figure 11-3 Spanning Tree and Redundant Connectivity
Catalyst 2950 or 3550
Catalyst 2950 or 3550
You can also create redundant links between switches by using EtherChannel groups. For more
information, see

Accelerated Aging to Retain Connectivity

The default for aging dynamic addresses is 5 minutes, the default setting of the mac-address-table
aging-time global configuration command. However, a spanning-tree reconfiguration can cause many
station locations to change. Because these stations could be unreachable for 5 minutes or more during a
reconfiguration, the address-aging time is accelerated so that station addresses can be dropped from the
address table and then relearned. The accelerated aging is the same as the forward-delay parameter value
(spanning-tree vlan vlan-id forward-time seconds global configuration command) when the spanning
tree reconfigures.
Because each VLAN is a separate spanning-tree instance, the switch accelerates aging on a per-VLAN
basis. A spanning-tree reconfiguration on one VLAN can cause the dynamic addresses learned on that
VLAN to be subject to accelerated aging. Dynamic addresses on other VLANs can be unaffected and
remain subject to the aging interval entered for the switch.

Configuring Spanning-Tree Features

These sections describe how to configure spanning-tree features:
78-14982-01
Switch A
switch
switch
Switch B
Active link
Blocked link
Chapter 27, "Configuring EtherChannels."
Default STP Configuration, page 11-10
STP Configuration Guidelines, page 11-10
Disabling STP, page 11-12
Configuring the Root Switch, page 11-12
Configuring a Secondary Root Switch, page 11-14
Configuring the Port Priority, page 11-15
Configuring the Path Cost, page 11-16
Configuring the Switch Priority of a VLAN, page 11-18
Switch C
Workstations
Catalyst 2950 Desktop Switch Software Configuration Guide
Configuring Spanning-Tree Features
Catalyst 2950 or 3550
switch
11-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 2950

Table of Contents