Esata Port Assembly - HP dc7900 - Convertible Minitower PC Service & Reference Manual

eSATA port assembly

1. Prepare the computer for disassembly
2. Remove the computer access panel
3. Remove the two screws that secure the port to the chassis.
4. Disconnect the cable from the system board
5. Remove the port assembly from the chassis.
Figure 7-47
To install the eSATA port, reverse the removal procedure.
Removing the eSATA port
(Preparation for Disassembly on page
(Computer Access Panel on page
63).
70).
eSATA port assembly 103