Using The Small Form Factor Computer In A Tower Orientation - HP dc7900 - Convertible Minitower PC Service & Reference Manual

Using the Small Form Factor Computer in a Tower
Orientation
The Small Form Factor computer can be used in a tower orientation. The HP logo plate on the front
bezel is adjustable for either desktop or tower orientation.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. Squeeze together the two sides of the peg on the back side of the logo plate (1) and push the peg
inwards towards the front side of the bezel (2).
5. Rotate the plate 90 degrees (3) then pull back on the peg to lock the logo plate in place.
Figure 8-71
6. Replace the front bezel.
7. Replace the access panel.
176 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
(Computer Access Panel on page
(Front Bezel on page
Rotating the HP Logo Plate
(Preparation for Disassembly on page
125).
126).
118).