I/O Assembly - HP Z Series Maintenance And Service Manual
Hide thumbs
Also See for Z Series:
- User manual (40 pages) ,
- Installation manual (14 pages) ,
- Faq (1 page)
Table of Contents
Advertisement
4.
Remove the access panel (3) by lifting it straight up.
To install the access panel, reverse the removal procedure.
I/O assembly
To remove the I/O assembly, use these procedures.
Before removing the I/O assembly, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the access panel (see
Remove the I/O assembly:
1.
Disconnect the I/O front audio cable (1) from the system board.
2.
Disconnect the I/O assembly UI cable (2) from the I/O assembly.
3.
Disconnect the I/O assembly USB cable (3) from the I/O assembly.
4.
Disconnect the I/O assembly memory card reader cable (4) from the I/O assembly.
Preparation for disassembly on page
Access panel on page
20).
18).
I/O assembly
21
Advertisement
Table of Contents
