Removing an Optical Drive
CAUTION:
computer.
To remove an optical drive:
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Rotate the drive cage to its upright position.
Figure 8-27
4.
Disconnect the power cable (1) and data cable (2) from the rear of the optical drive.
Figure 8-28
All removable media should be taken out of a drive before removing the drive from the
(Computer Access Panel on page
Rotating the Drive Cage Up
Disconnecting the Power and Data Cables
(Preparation for Disassembly on page
118).
125).
Drives 143