Hood Sensor - HP dc7900 - Convertible Minitower PC Service & Reference Manual

Hood Sensor

The hood sensor is installed in the top of the baffle that is attached to the chassis fan.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. Remove the fan shroud
5. Remove the chassis fan
6. Lift the hood sensor straight up and out of the chassis fan baffle.
Figure 8-57
To install the hood sensor, reverse the removal procedure.
(Computer Access Panel on page
(Front Bezel on page
(Fan Shroud on page
(Front Fan Assembly on page
Removing the hood sensor from the chassis fan
(Preparation for Disassembly on page
126).
161).
162).
118).
125).
Hood Sensor 163