Changing from Desktop to Tower Configuration
1.
Prepare the computer for disassembly
2.
Remove the computer access panel
3.
Remove the front bezel
4.
On the back side of the logo plate, press down on the "step" to remove the logo plate from the
bezel (1).
5.
Rotate the plate 90 degrees (2) then press the logo plate back into the bezel.
Figure 9-39
6.
Replace the front bezel.
7.
Replace the access panel.
210 Chapter 9 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis
(Front Bezel on page
Rotating the HP Logo Plate
(Preparation for Disassembly on page
(Computer Access Panel on page
184).
178).
183).