Changing from a Minitower to a Desktop Configuration
1.
Prepare the computer for disassembly
2.
Remove the computer access panel
3.
Remove the front bezel
4.
Disconnect all power and data cables from the back of the drives in the 5.25-inch drive bays.
5.
To release the drives from the 5.25-inch drive bay, lift the release tab on the green latch drive
bracket for the drive. While lifting the release tab, slide the drive from its drive bay. Repeat this step
for each 5.25-inch drive.
Figure 7-58
(Front Bezel on page
Releasing the 5.25-inch Drives from the Drive Bays (Minitower)
(Preparation for Disassembly on page
(Computer Access Panel on page
71).
Changing from a Minitower to a Desktop Configuration 113
63).
70).