Eaton Powerware 9130 User Manual page 72

UPS MAINTENANCE
Internal Battery
Connector
Up to 1500 VA Models
64
Eaton ® 9130 UPS (700–3000 VA) User's Guide
Figure 23. Removing the UPS Right Front Cover
2. Disconnect the internal battery connector (see Figure 24).
3. Up to 1500 VA models only. If the EBM cable is not connected to an
EBM, unclip the EBM cable and move it to the left out of the way.
See Figure 24.
Battery Cover Plate
EBM Cable
Figure 24. Disconnecting the UPS Internal Batteries (Shown without EBMs)
4. Grasp an edge of the battery cover plate and pull it forward gently.
Remove and retain the battery cover plate. See Figure 24 for the
location of the battery cover plate.
S
NOTE Leave
ribbon cable
connected.
2000–3000 VA Models
164201718 Rev 2 www.powerware.com
Battery Cover Plate
Internal Battery
Connector