Eaton Powerware 9130 User Manual page 47

Table 2. Menu Map for Display Functions
Main Menu Submenu
UPS Status
Event Log
Measurements
Control Go to Bypass
Start Battery Test
Reset Error State
Load Segments
Restore Factory
Settings
Identification
Settings User Settings
Service Settings
Eaton
Table 2 shows the basic menu structure.
Display Information or Menu Function
Main status (mode and load) / Notice or Alarm status (if any) /
Battery status (state and charge level)
Displays up to 127 events and alarms
The Event Log is also available through the serial port. See
"Retrieving the Event Log" on page 47.
Load W VA / Load A pf / Output V Hz / Input V Hz / Bypass V Hz /
Input Line Events / Battery V min
Transfers the UPS system to internal Bypass mode
When this command is active, the option changes to "Go to
Normal."
Starts a manual battery test
See "Testing New Batteries" on page 72.
Clears a "Battery Test Failed" alarm
Load segment 1: ON | OFF
Load segment 2: ON | OFF
These commands overrule user settings for load segments. See
"Configuring Load Segments" on page 49.
Returns all settings to original values
UPS Type / Part Number / Serial Number / Firmware
See Table 3 for details.
This menu is password-protected.
® 9130 UPS (700–3000 VA) User's Guide
S
164201718 Rev 2 www.powerware.com
OPERATION
39