Rackmount Setup - Eaton Powerware 9130 User Manual

INSTALLATION
20
Eaton ® 9130 UPS (700–3000 VA) User's Guide

Rackmount Setup

S
The cabinet is heavy (see page 78). Removing the cabinet from its carton requires a
minimum of two people.
S
If installing optional EBM(s), install the EBM(s) directly below the UPS so that all wiring
between the cabinets is installed behind the front covers and is inaccessible to users.
NOTE Mounting rails are required for each individual cabinet.
To install the rail kit:
1. Assemble the left and right rails to the rear rails as shown in
Figure 4. Do not tighten the screws.
Adjust each rail size for the depth of your rack.
Rear Rails
S
C A U T I O N
M4 8 Pan-Head
Screws (6 places)
Left Rail
Figure 4. Assembling the Rails
164201718 Rev 2 www.powerware.com
Right Rail