Verify Communication Between Switch and HAFM appliance
Communication must be verified between the switch and the HAFM appliance
Element Manager and EWS applications.
To verify switch-to-appliance communication:
1. At the HAFM application main window (physical map or product list),
Table 3: Switch Operational States and Symbols
Operational—switch-to appliance communication is established,
the switch is operational, and no failures are indicated. Go to
Switch Date and Time" on page
Degraded—s
the switch is operating in degraded mode and requires service. This
condition is typical if a port or redundant FRU fails.
Failed—switch-to appliance communication is established, but the
switch failed and requires immediate service. Go to
Status Unknown—the switch status is unknown because of a
network communication failure between the switch and HAFM
appliance. Go to
2. Right-click the switch icon at the HAFM application's physical map. A
3. Select the Element Manager option from the pop-up menu. When the
Edge Switch 2/24 Installation Guide
inspect the shape and color of the status symbol associated with the Edge
Switch product icon.
states.
Operational State
witch-to-appliance communication is established, but
step
2.
pop-up menu appears.
Element Manager application opens, the last view (tab) accessed by a user
opens by default. The example in
Installing and Configuring the Edge Switch 2/24
Table 3
explains the symbols and associated operational
63.
Figure 15
"Set
Go to
step
2.
step
2.
shows the Hardware View.
Symbol
61