Using the Embedded Web Server
5. Click Activate to save the information. The message Your changes to
6. Set the switch online:
106
d. Select the Interop mode:
— McDATA Fabric 1.0. (default). Select this mode if the fabric contains
only M-series switches that are operating in McDATA Fabric 1.0
mode.
— Open Fabric 1.0. Select this mode if the fabric contains HP directors
and switches, as well as other open fabric-compliant switches. Select
this mode for managing heterogeneous fabrics.
the operating parameters configuration have been
successfully activated displays.
a. At the View window, select Operations at the left side of the panel. The
Operations panel opens with the Switch Beacon page displayed.
b. At the Operations panel, click the Online State tab, then click Set
Online. The message Your operations changes have been
successfully activated displays.
Edge Switch 2/24 Installation Guide