HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual page 83

2. Click New. The New Threshold Alert dialog box displays, as shown in
Figure 28: New Threshold Alerts dialog box
3. Enter a name from one to 64 characters in length. All characters in the ISO
4. Choose one of the following from the drop-down list under the Name field:
5. Click Next. A new screen displays with additional parameters, as shown in
Note:
Edge Switch 2/24 Installation Guide
Figure 28.
Latin-1 character set, excluding control characters, are allowed.
Rx Throughput—An alert will occur if the threshold set for receive
throughput is reached
Tx Throughput—An alert will occur if the threshold set for transmit
throughput is reached.
Rx or Tx Throughput—An alert will occur if the threshold set for either
receive or transmit throughput is reached.
Figure 29. The name configured for the alert displays at the top of the screen.
Click Previous if you need to return to the previous screen.
Installing and Configuring the Edge Switch 2/24
first screen
—
83