Back Up the Configuration
Use these steps to back up the configuration file on the HAFM appliance.
1. At the HAFM appliance, open the HAFM application. The Products View
2. At the SAN management application's physical map, right-click the product
3. Choose Maintenance > Backup & Restore Configuration. The Backup and
Figure 54: Backup and Restore Configuration dialog box
4. Click Backup. An Information dialog box displays, indicating the backup
Figure 55: Information dialog box
5. Click OK to complete the backup operation and close the dialog box.
Edge Switch 2/24 Installation Guide
displays.
icon representing the switch for which a configuration file is to be backed up,
then select Element Manager from the pop-up menu. The application opens.
Restore Configuration dialog box displays
operation was initiated
(Figure
(Figure
55).
Manage Firmware Versions
54).
123