Set Fabric Parameters - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Using the Embedded Web Server
5. Click Activate to save the information. The message "Your changes to
6. Set the switch online:

Set Fabric Parameters

The switch must be set offline to configure fabric parameters. To configure the
parameters:
1. Set the switch offline as follows:
2. At the View window, select Configure at the left side of the panel. The
3. At the Configure panel, click the Switch tab, then select Fabric Parameters.
4. Set the fabric parameters
104
the Operating Parameters configuration have been
successfully activated" displays.
a. Choose Operations >Online State. The Operations page displays with
the Online State tab selected.
b. Click Set Online. The message "Your changes have been
successfully activated" displays.
a. At the View window, select Operations at the left side of the panel. The
Operations panel opens with the Switch Beacon page displayed.
b. At the Current State window, click Set Offline. The message Your
operations changes have been successfully
activated displays.
Configure panel opens with the Ports page displayed.
The Switch page displays with Fabric Parameters.
(Figure 42):.
Edge Switch 2/24 Installation Guide