Rolling Back The Software Configuration - HP 10500 Series Configuration Manual

Uninstalling feature images
Perform this task in user view.
Task
Deactivate feature images.
Uninstalling patch images
Perform this task in user view.
Step
1. Deactivate patch images.
2. (Optional.) Confirm the software
changes.

Rolling back the software configuration

Every time you activate or deactivate a software image, the system creates a rollback point to record the
current software configuration. Before you execute the install commit command to confirm the software
changes (executing this command also removes all rollback points), you can roll back the software
configuration to a rollback point to cancel all software image upgrade-related operations performed
after the rollback point. You can also roll back the software configuration to the original software
configuration (the software configuration before you performed the ISSU).
For an incremental upgrade, up to 50 rollback points are supported. After the limit is reached, the oldest
rollback points are deleted to make room for newly created rollback points.
For ISSU reboot upgrades and reboot upgrades, the system does not record and maintain any rollback
point, and you can roll back the software configuration only to the original software configuration.
Patch images do not support rollback.
To make a rollback take effect after a reboot, you must confirm the rollback operation using the install
commit command.
To roll back the software configuration, execute the following commands in user view:
Step
1. Roll back the software configuration to
an earlier rollback point or the
original software configuration.
2. (Optional.) Confirm the software
changes.
Command
•
In standalone mode:
install deactivate feature filename&<1-30> slot slot-number
•
In IRF mode:
install deactivate feature filename&<1-30> chassis
chassis-number slot slot-number
Command
•
In standalone mode:
install deactivate patch filename slot slot-number
•
In IRF mode:
install deactivate patch filename chassis chassis-number slot
slot-number
install commit
Command
install rollback to { point-id |
original }
install commit
147
Remarks
To view available rollback
points, use the display
install rollback command.
N/A